• TTE® the simple solution for your cattle paths

    The TTE® system replaces the base course layer and can be placed directly on the natural meadow.

  • Full seepage of water

    Due to the non-compacting construction principle rainwater can seep away continuously and build-up of mud is impossible. More photograps

equestrian sport & keeping of animals

TTE® yard / cattle exercise area

Easy to maintain and appropriate cattle holding areas - ideal as a self-build

TTE®-MultiDrain PLUS 3000

TTE®-MultiDrainPLUS 3000
800 x 400 x 60 mm, approx. 8.6 kg/piece (ca. 27 kg/m²)
Web thickness: 14 / 15 mm

  • TTE® is significantly more stable than paddock mats and light grids
  • the system replaces the base course layer (no excavation & compaction)
  • an ABOVE-structure and protection from compaction (through load distribution) securing seeping away of rain water by up to 100% => build-up of mud is impossible
  • low odour surfaces => decomposition of nitrate contamination by the retained top soil (microorganisms)
  • an impact dampening/easy on the joints construction principle => construction hard onto soft (natural soil)
  • residue-free removal and a high resale value (about 50% after 5 years
  • a simple approval process => no intervention in the ground - the landscape protection concept
  • simple and quick implementation - possible as a self-build

Elastic layer made out of wood chip

  • the interlocking and load distribution of the TTE® elements allow overbuilding of an elastic layer
  • the increased impact dampening leads to increased wear-reduction on the joints and system
  • the elastic layer insulates from the cold and promotes rapid thawing of ice and snow

A construction cross-section of TTE® cattle paths

cattle paths

Simple and quick to create a TTE® cattle path

1. Application of the bedding to the flat surface
1. Application of the bedding to the flat surface
2. Laying of TTE® elements on the fine network
2. Laying of TTE® elements on the fine network
3. Filling and overfilling of the TTE® elements, for example with sand
3. Filling and overfilling of the TTE® elements, for example with sand